Sanyo PLC-SU50S - Manual (Page 20)

20
Press the FREEZE button on the remote control to freeze the picture
on the screen. To cancel the FREEZE function, press the FREEZE
button again or press any other button.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
Basic Operation
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The direction of the arrow being corrected turns red.
• If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled.
Keystone Adjustment
Picture Freeze Function
Zoom Adjustment
Focus Adjustment
Reduce the upper width
with Point Up button. Reduce the lower width
with Point Down button. Reduce the left part with
Point Left button. Reduce the right part with
Point Right button.
1 Press the KEYSTONE button on the remote control or select
Keystone in the Setting Menu (p38). The keystone dialog box
appears.
2 Correct keystone distortion by pressing the Point
Up/Down/Left/Right button. Press the Point Up button to
reduce the upper part of the image, and press the Point Down
button to reduce the lower part. Press the Point Left button to
reduce the left part, and press the Point Right button to reduce
the right part.
Keystone adjustment can be memorized. (p38)
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Ring
Focus Ring
FREEZE button