Sanyo PLC-SU50S - Manual (Page 11)

11
Part Names and Functions
ON - OFF
POWER
KEYSTONE
INPUT
WARNING
LAMP
REPLACE
MENU
V
O
L
U
M
E
– V
O
L
U
M
E
+
SELECT
This projector has control buttons and indicators on its top.
Top
q w e r t y
u i o
o
LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p43)
y
WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p41)
e
POWER ON–OFF button
Turns the projector on or off. (p19)
t
POWER indicator
Flashes red until the projector gets ready to be turned on. It
turns red when the projector is in the stand-by mode. It
remains green while the projector is under operation.
w
INPUT button
Selects input source. (p24, 32 ) u
MENU button
Opens or closes the On-Screen Menu. (p22)
i
POINT (Up/Down/Left/Right ) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom +/– mode.
(p31)
Point Left/Right button are used as VOLUME +/– button. (p21)
r
SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom +/– mode. (p31)
q
KEYSTONE button
Corrects keystone distortion. (p20, 38)