Specifications, 17 design, Drive units – Sunfire CRW-2 User Manual
Page 17: Frequency response, Crossover frequency, Maximum power, Minimum power, Sensitivity, Maximum output, Impedance
User's Manual
17
Design
-way, High Pressure
Magnetically Shielded
Drive Units
HF: Waveguide loaded Neodymium
Ribbon
LF: Dual 4.5-inch High Back-emf
Frequency Response
95 Hz to 40 kHz
Crossover Frequency
1.5 kHz
Maximum Power
400 watts
Minimum Power
5 watts
Sensitivity
(2.83 V/1 meter)
90 dB
Maximum Output
115 dB
Impedance
8 ohms nominal
Connections
1 pairs gold plated spring terminals
Dimensions
(Maximum dimensions, including grille)
CRW-
Height
23.10" (587 mm)
Width
7.87" (200 mm)
Depth
4.05" (103 mm)
Cutout
20.8" x 6.4" (528 x 163 mm)
Weight
15 lb (6.8 kg)
CRW-C
Height
7.87" (200 mm)
Width
23.10" (587 mm)
Depth
4.05" (103 mm)
Cutout
6.4" x 20.8" (163 x 528 mm)
Weight
15 lbs (6.8 kg)
Specifications
© 2008 Sunfire, LLC.
All rights reserved. Sunfire, LLC reserves
the right to improve its products at any time.
Therefore, specifications are subject to
change without notice.
Manual 91-156-00 Rev A