Sunfire CRW-2 - Manual (Page 10)

User's Manual
10
With two surround back loudspeakers,
set them behind and between the sur-
round loudspeakers.
9.1 Configuration
Some Sunfire home theater processors
and receivers have two side-axis chan-
nels that are matrixed from the left and
right front channels, and they are avail-
able in stereo as well as surround modes.
For the side-axis, you could use an-
other pair of CRW- loudspeakers.
Place the side-axis loudspeakers
along the side walls, close to the fronts.
Subwoofer Location
The best location for a single
subwoofer can be found by following
these steps:
1. Place the subwoofer on your couch
or favorite easy-listening chair.
. You can then either run a calibra-
tion (noise) signal through it, or
play some of your favorite music
samples with heavy bass.
. Walk around the room, standing in
all the positions where you might
be able to place the subwoofer.
This is usually somewhere close
to the corners of the room. Try
locations fairly close to the front
loudspeakers, and try crouching
down low.
4. Find the place in the room where
the bass output from the subwoofer
is most even. Shut things down and
install the subwoofer there.
5. This is the best position for the
subwoofer. The bass will sound the
best when you are sitting in your
normal listening position.
7.1 System
9.1 System