Siemens hearing systems - Manual (Page 15)

Volume control
Your ARTIS hearing system is
fully automatic. There is no need
to manually adjust the volume
control. However, if you prefer
manual volume control, your
ARTIS hearing system can be
programmed for manual adjustment, too.
If your system is programmed for manual adjustment, the
wheel-shaped volume control can be rotated clockwise or
forward (louder) or counterclockwise or backward (softer)
to select the desired listening volume.
To increase volume, place your index finger gently against
the volume control wheel and rotate it forward. If your
hearing system is equipped with a warning tone for volume
control limits, once it is heard, adjusting the volume control
further in that direction will have no effect. To reduce the
volume, rotate the wheel in the opposite direction.
If your hearing system has not been programmed for manual
control adjustment, the volume will automatically adjust and
rotating the volume control wheel will have no effect.
15
Using the volume control
Note:
For ARTIS e2e systems
If you are wearing two hearing instruments, the volume will
be changed on both instruments at the same time.
240605401_Siemens_ARTIS_ITE_GB 19.12.2005 10:35 Uhr Seite 15