Sharp XL DK227N - Manual (Page 35)

03/12/17 XL-DK227N.fm
35
XL-DK227N
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Speaker
Power source AC 120 V ~ 60 Hz
Power consumption 35 W
Dimensions Width: 7-1/16" (180 mm)
Height: 10-2/8" (260 mm)
Depth: 10-6/8" (273 mm)
Weight 8.8 lbs (4 kg)
Output power RMS : Total 64 W (32 W per channel into 4
ohms at 1 kHz, 10% Total harmonic
distortion.)
FTC : 25 W minimum RMS per channel
into 4 ohms from 100 Hz to 20 kHz,
10% Total harmonic distortion.
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Input terminals Audio In (Audio signal):
250 mV/47 k ohms
Type Single disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter Multi bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Type 2-way type speaker system
2" (5 cm) tweeter
4" (10 cm) woofer
Maximum input
power 64 W
Rated input power 32 W
Impedance 4 ohms
Dimensions Width: 5-13/16" (148 mm)
Height: 10-1/4" (260 mm)
Depth: 6-15/16" (175.5 mm)
Weight 4.72 lbs (2.14 kg)/each