Sharp XL DK227N - Manual (Page 20)

03/12/17 XL-DK227N.fm
20
XL-DK227N
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc (continued)
After the last track is played, the unit will stop automatically.
To remove the discs:
In the stop mode, press the OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 3" (8 cm) disc in the middle of the disc tray.
Docking Station MICRO COMPONENT SYSTEM
Docking S tation MICRO COM PONENT SY STEM
5" (12 cm) 3" (8 cm)
5 Press the OPEN/CLOSE button to close the disc tray.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6 Press the / button to start playback.
[CD]
Total number of
tracks on the disc Total playing
time of the disc Total number
of files
MP3 indicator
[MP3/WMA]
TOTAL indicator WMA indicator
Disc play indicator Disc play indicator