Sharp XL DK227N - Manual (Page 17)

03/12/17 XL-DK227N.fm
17
XL-DK227N
iPod
To insert iPod adaptor
1. Press the ON/STAND-BY button to turn the power on.
2. Open the iPod docking station by pushing the area marked
“ PUSH OPEN”.
3. Insert the iPod adaptor into the ipod dock and connect your iPod.
To remove iPod adaptor
1. Adaptor with tip.
2. Adaptor without tip.
Insert the tip of a screwdriver (“–“ type, small) into the iPod adaptor
hole as shown and lift upward to remove)
iPod playback
Caution:
Do not place the iPod docking base without any support from below
when inserting the iPod unit, otherwise it may damage the iPod
docking station.
To remove iPod unit
Press and hold the iPod docking
base when removing the iPod unit.
PLAYBACK (P LAY & STOP)
iPod adaptor
Dock connector
iPod iPod (bottom)
iPod dock
iPod connector
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button to select iPod function.
3 Insert iPod unit in iPod dock of main unit. “DOCK OK” will
be displayed for 3 seconds except for iPod mini and 4th
Generation iPod.
4 Press the / button to start playback.
Hold this tip and pull as direction shown to
remove adaptor
pull up
iPod
iPod adaptor