Sony SPP-A985 - Manual (Page 24)

Basics 24 US
1
Pick up the handset from the
base phone.
2
Press (TALK) and wait until
“TALK” appears on the display.
The display also shows the talk
time in hours, minutes and
seconds.
You will then hear a dial tone.
“HANDSET IN USE” appears
on the display of the base phone
and the LINE lamp on the base
phone lights up.
If “CHANNEL SEARCHING”
appears on the display, move
closer to the base phone.
3
Dial the phone number.
4
When you’re done talking, press
(OFF) or replace the handset on
the base phone.
The display and the LINE lamp
on the base phone go off.
Making calls when the headset is connected
When the TL-HD1 headset (optional) is connected to the I
(HEADSET) jack, you can talk through the headset.
Precaution
Avoid listening your headset at so loud a volume that extended play might
affect your hearing.
Basics
Making calls
(REDIAL)
(*TONE)
VOL switch
(HOLD)
(MUTING)
I (HEADSET)
jack
(CALL WAITING/ FLASH)