Smeg A1C - Manual (Page 18)

Instructions for the user
45
7.6 Spit cooking
FUNCTION SWITCH
THERMOSTAT SWITCH AT MAXIMUM
Insert the food to be cooked on to the rod and tighten screws A of the
forks. Fit frames B into the holes of the bowl F. Remove handle D and
position the spit rod so that pulley E fits into the slot on the right-hand
side of frame B. Completely introduce the bowl into the oven until the tip
of the rod of frame B on the left-hand side fits into drive seat C of the spit
motor on the back wall of the oven. Pour a bit of water into the pan to
avoid smoke from the dripping.
Make sure that the oven door is closed during cooking.
It is normal for the thermostat light to flash during cooking. This indicates
the temperature inside the oven is regular.