Sanyo BELL SCP-2400 - Manual (Page 87)

Using Your Phone’s Tools
Setting the Alarm Clock
To set the alarm clock:
1. Press to access the main menu.
2. Select Tools.
3. Select Alarm Clock.
4. Press (left softkey) to continue.
5. Select the box under the following items.
ᮣ Alarm to set the alarm On or Off.
ᮣ Time to enter the alarm time. Enter the desired alarm time and
press .
ᮣ Repeat to select the alarm frequency. Select None to set your
alarm once or Daily to set your alarm daily.
6. Press (left softkey) to save the alarm settings.
Note: Alarm will not sound when the phone is powered off.
To stop the alarm:
ᮣ Press any key to stop the alarm.
ᮣ Press (right softkey) to exit the alarm.
Tip: The alarm stops automatically after 30 seconds.
Note: In a no-service area or an analog service area, it’s necessary to
set the actual time and date to use the Alarm Clock function.
Exit
Done
Continue
79