Setting a start-up/power-off tone, Using voice prompt, Setting up key press echo – Sanyo BELL SCP-2400 User Manual
Page 37

Setting a Start-up/Power-off Tone
1. Press
to access the main menu.
2. Select Settings.
3. Select Sounds.
4. Select Others.
5. Select Start-up Tone or Power-off Tone.
6. Scroll to your desired tone, and press
.
Using Voice Prompt
This feature allows you to hear voice prompts at Voice Memo,
Screen Call setting etc. (Default Setting is Off.)
1. Follow the steps 1-4 above.
2. Select Voice Prompt.
3. Select On.
Tip:
When ringer volume is set to “Silence All”, voice prompts cannot be
heard.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when
you press the keypad. This feature is available when you are in
standby mode.
1. Press
to access the main menu.
2. Select Settings.
3. Select Sounds.
4. Select Others.
5. Select Key Press Echo.
6. Select On or Off.
29
- Scp 8100 (115 pages)
- Scp 8100 (71 pages)
- SCP-2700 (139 pages)
- VL-2300 (286 pages)
- RL 4920 (258 pages)
- S1 (131 pages)
- MM-7400 (326 pages)
- scp 7500 (173 pages)
- SCP-6400 (100 pages)
- SCP-2300 (150 pages)
- SCP-7300 (161 pages)
- EP92H (21 pages)
- PRO-700 (133 pages)
- VI-2300 (286 pages)
- SCP-8400 (282 pages)
- VM4500 (244 pages)
- SCP-2400 (140 pages)
- SCP-7050 (139 pages)
- SCP-6600 (133 pages)
- SCP200 (22 pages)
- MM-5600 (330 pages)
- SCP-3200 (281 pages)
- Katana Cell Phone (151 pages)
- QWEST SCP-8300 (310 pages)
- SCP-3100 (157 pages)
- PCS VISION RL-4920 (258 pages)
- SCP 4900 (202 pages)
- RL2500 (205 pages)
- MM-9000 (367 pages)
- M1 (284 pages)
- RL7300 (252 pages)
- MM-8300 (324 pages)
- SCP-4920 (230 pages)
- GH68-24473A (158 pages)
- MIRRO PLS-3810 (126 pages)
- SCP-7400 (293 pages)
- PRO-200 (236 pages)
- P260 (20 pages)
- Katana LX (165 pages)
- scp8300 (179 pages)
- PCS Vision PM-8200 (257 pages)
- Katana (216 pages)