Adv anced setting up the camera system – Samsung Digimax 340 User Manual
Page 69
ADV
ANCED
SETTING UP THE CAMERA SYSTEM
VIDEO OUT
The video output signal from the camera can be NTSC or PAL. Your choice of output will
be governed by the type of machine (monitor or TV, etc.) to which the camera is
connected.
Select the correct video standard for the outer monitor. PAL mode can support only
BDGHI.
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP (
) / DOWN (
) button and select [VIDEO
OUT].
5. The cursor can be moved by pressing the RIGHT (
)
button to the [VIDEO OUT] sub menu.
6. Select the desired sub menu by pressing the UP (
) /
DOWN (
) buttons. The default is NTSC.
7. After selecting the desired sub menu, press the OK
button to confirm the setting.
The camera will be restarted.
VIDEO OUT
P1
SELECT
OK SET
FORMAT
3 MIN
02/ 01/ 01
ON
NTSC
NTSC
PAL