Samsung Digimax 340 - Manual (Page 42)

SETTING UP THE SHOOTING FUNCTION
SIZE
In STILL IMAGE and MACRO SHOT mode, you can select the image size.
A large image uses more memory, so increasing image size will reduce the total number of
shots you can store on a CF CARD. The image sizes are listed below.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN ( ) button and select [IMAGE
SIZE].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [IMAGE SIZE] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons.
The default is Digimax 410 : 2272x1704
Digimax 340 : 2048x1536.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
2048x1536 Digimax 340
Digimax 410
1024x768 640x480
2272x1704 1600x1200 640x480
< STILL IMAGE mode >
< MACRO SHOT mode >
P1 SELECT OK SET
IMAGE SIZE
(D-410)
2272X1704
1600X1200
640X480
(D-340)
2048X1536
1024X768
640X480
P1 SELECT OK SET
IMAGE SIZE
(D-410)
2272X1704
1600X1200
640X480
(D-340)
2048X1536
1024X768
640X480