Sony RDR-HX780 - Manual (Page 114)

114
Nothing was recorded even though you
set the timer setting correctly.
, There was a power failure during
recording.
, The recorder’s internal clock stopped due
to a power failure that lasted for more than
1 hour. Reset the clock (page 98).
, The channel was disabled after the timer
recording was set. See “Manual CH
Setting” on page 100.
, Disconnect the AC power cord from the
AC outlet, and connect it again.
, The program contains copy protection
signals that restrict copying.
, Another timer setting overlapped the timer
setting (page 45).
, There is no DVD inside the recorder.
, There is not enough disc space for the
recording.
, The recorder was in the process of
dubbing.
Recording does not stop immediately
after you press x REC STOP.
, It will take a few seconds for the recorder
to input disc data before recording can
stop.
On-screen instructions may appear after
pressing x REC STOP. In this case,
follow the on-screen instructions.
Recording does not stop after you press
x
STOP.
, Press x REC STOP.
Timer recording is not complete or did
not start from the beginning.
, There was a power failure during
recording. If the power recovers when
there is a timer recording, the recorder
resumes recording.
Should the power failure continue for more
than 1 hour, reset the clock (page 98).
, Another timer setting overlapped the timer
setting (page 45).
, Disc space was not sufficient.
Contents previously recorded were
erased.
, Data that is not playable on this recorder
but was recorded on a DVD with a PC will
be erased from the disc when the disc is
inserted.
The recorder does not play any type of
disc (except HDD).
, The disc is upside down. Insert the disc
with the labeled side facing up.
, The disc is not correctly inserted.
, Moisture has condensed inside the
recorder. In this case, if the recorder is on,
leave it on (if it is off, leave it off) for about
an hour until the moisture evaporates.
, If the disc was recorded on another
recorder and was not finalized (page 38),
the recorder cannot play the disc.
The recorder does not start playback from
the beginning.
, Resume play was activated (page 49).
, You have inserted a DVD whose Title
menu or DVD menu automatically appears
on the TV screen when it is first inserted.
Use the menu to start playback.
The recorder starts playing
automatically.
, The DVD VIDEO features an auto
playback function.
Playback stops automatically.
, If the DVD has an auto pause signal, the
recorder stops playback at the auto pause
signal.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
, Depending on the DVD, you may not be
able to do some of the operations above.
Refer to the instruction manual supplied
with the disc.
Playback