Shindaiwa X7501920500 - Manual (Page 6)

6
An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en-
gine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for
the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emis-
sion may be applicable to California models only.
Specifications
Specifications are subject to change without notice.
Model EB254
Engine Type 4-cycle air cooled gasoline engine, vertical cylinder
Engine Bore x Stroke 34 mm x 27 mm (1.3 in x 1.1 in.)
Engine Displacement 24.5cc (1.5 in 3 )
Unit Weight (without blower tube) Less Fuel 4.9 kg (10.8 lb)
Unit Dimensions (LxWxH) 897 x 255 x 375 mm (35 x 10 x 15 in)
Fuel Tank Capacity 0.6 liter/20.0 oz.
Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Carburetor Diaphragm type
Ignition CDI (Capacitor Discharge Ignition)
Spark Plug NGK CMR5H
Electrode Gap 0.6 mm (.024 in)
Torque 16.7 - 18.6 Nm / 148-165 in • lbs
Air Cleaner Dry Element
Muffler Type Spark arrestor muffler or spark arrestor muffler with catalyst
Starting Method Recoil Starter
Stopping Method Slide Switch (grounding type)
Air Speed 81.4 m/sec. (182 MPH)
Air Volume 8.5 m 3 /min. (300 cu. ft./min.)
Sound Level @ 50 ft. dB(A) scale per ANSI B175.2 68 dB(A)
Idle Speed (RPM) 3,000
Wide Open Throttle (RPM) 8,600