Shindaiwa X7501920500 - Manual (Page 5)

5
Unit Description
Figure 3
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from
your local authorized Shindaiwa dealer.
Recoil/
Starter
Handle
Fuel
Primer
Bulb
Throttle
Lever
Throttle
Limiter Lever
Exhaust
Air Cleaner
Cover
Fuel Filler
Cap
Ignition Switch
Nozzle
Blower Tube
Contents
Using Figure 3 as a guide, familiar-
ize yourself with the blower and its
components. Understanding the unit
helps ensure top performance, longer
service life, and safer operation.
Before assembling the blower, make
sure you have all required compo-
nents.
• Power unit and blower assembly.
• This Owner’s/Operator’s Manual
and a tool kit containing a tool
bag,
T-Wrench, 4 mm Hex Wrench.
IMPORTANT!
The terms “left”, “left-hand”, “LH”;
“right”, “right-hand”, and “RH”; “front”
and “rear” refer to directions as
viewed by the operator during normal
operation.
Carefully inspect all components for
damage.