Sanyo SANUPS E11A102A - Manual (Page 23)

− 20 −
9.2 UPS Startup (Battery Power)
During a power outage, low voltage, or other trouble with the AC input power to the UPS, you
can supply power to the inverter output from the built-in batteries.
Hold for about 3 seconds
BATT
EXT.
MAIN SW
Buzzer
Musical trill
LEDs
Green INPUT Blinking
Green INV.ON/STAND BY Off
Green OUTPUT Off
↓
after 5 to 6 seconds
Green INPUT Blinking
Green INV.ON/STAND BY Lit
Green OUTPUT Lit
② Press and hold it until the buzzer sounds. Release it when
the buzzer sounds.
① Check that MAIN SW on the back panel is set to “OFF”.
LEDs are all off.
① Switch is “OFF” .