Sanyo SANUPS E11A102A - Manual (Page 17)

− 14 −
6.5 Attaching the Stand
CAUTION
！
・ Unless the UPS is secured solidly in place, it can shift or fall during seismic
events (earthquakes) or when it is subjected to shock or vibration, possibly
causing bodily injury.
・ Be careful not to get your hands caught when installing the stand.
Proceed as follows to attach the supplied stands.
① Prepare two supplied stands .
② Place the UPS in the stand.
Always place with the left side of the UPS on the bottom, and the control
panel on the top.
③ If required, secure the stand to the UPS with the screws .
This completes the stand attaching.