Sony ca-d50 - Manual (Page 9)

9
Mounting on Video Camera
This unit
Groove
Slot
Projection
(Continued)
This unit is dockable with a DXC-D35/D35WS series digital
video camera.
Before mounting on a DXC-D35/D35WS series camera,
remove the camera’s shoulder pad.
On how to remove the shoulder pad, refer to the procedure of
mounting a VTR described in the operating instructions for the
DXC-D35/D35WS series camera.
Note
Always power the camera off before mounting this unit.
1
Fit the projection on the bottom of
this unit into the slot on the
camera.
2
Slide the unit along the groove on
the camera, and press firmly until
fixed.
Camera