Sanyo VPC-AZ3 - Manual (Page 74)

BASIC SHOOTING FUNCTIONS
Using the flash
The flash is used not only for taking pictures where there is insufficient light,
but also when the subject is in shade or in backlight conditions. Your camera
has four modes of operation (automatic flash mode, forced flash mode, flash
off mode, and red-eye reduction mode). Flash photography is possible only in
the still image shooting mode.
1
Set the camera to the still image
shooting mode (see page 59).
2
Press the flash button.
œ The current flash mode is shown on
the LCD monitor.
Flash button
Flash
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
71
English