Sanyo VPC-AZ3 - Manual (Page 15)

B
Cautions when plugging in the battery pack charger
œ
Securely plug the power cord all the way into the power
outlet when using the battery pack charger. If the battery
pack charger is used with the power cord not fully plugged
in, heat may be generated and cause a fire.
œ If the power cord is damaged, or cannot be correctly
plugged into the power outlet, do not use the battery pack
charger. Using the battery pack charger in this condition
may cause a fire or electric shock.
œ
Do not allow dust, etc., to build up on the power cord or
power outlet. A build-up of dust may cause a short circuit or
generate heat and cause a fire.
œ When unplugging the power cord, be sure to hold the
power plug and slowly pull it out of the power outlet. Pulling
the cord portion may damage the power cord and cause a
fire or electric shock.
B
Do not pull on the power cord to unplug it
œ Do not leave the power cord plugged into the power outlet
while the other end is not plugged into the battery pack
charger. The loose end can cause electrocution if touched
with wet hands or if handled by children.
œ
Use only the power cord supplied with the battery pack
charger. If a different power cord is used, it may be rated for
a different current load, and that may cause a fire.
œ
The supplied power cord is for exclusive use with the
supplied battery pack charger. Do not use it with other
devices, as doing so may cause a fire or electric shock.
œ Do not use a bundled power cord, as the heat generated
may cause a fire.
œ When using an extension cord, make sure that the total
wattage of the connected devices does not exceed the
rated value of the extension cord. If the power load exceeds
the rated value, it may cause a fire.
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
English
12