Sharp VL-NZ10S - Manual (Page 6)

iii
Quick Operation Guide
Easy Camera Recording on
Tape
1
Insert a cassette into the camcorder.
2
Set the Media Selection
switch to TAPE.
3
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens is now
displayed on the screen.
4
Press the REC START/STOP button to
begin recording.
To pause recording
Press the REC START/STOP button again.
Zooming
Push the Power Zoom control to T (1) (tele-
photo) or W (2) (wide angle) side.
Tape Playback
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock button
and set the Power switch
to VCR.
3
Press j (or k) on the Operation button
to rewind (or fast forward) the tape to the
desired point.
4
Press m to begin playback.
To stop playback
Press l.
Volume Control
Push the Volume control to the L or + side to
increase (1) or decrease (2) the volume.
A U T O
RE C
Power Zoom control
Power switch
STILL button
REC START/STOP button
Lock button
Lock button
Volume control
Power Zoom control/Volume control
Operation button
MULTI button
Media Selection switch