Sony HD-RCX300 - Manual (Page 172)

9
GB
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Internal memory format error.
HDD format error.
The internal recording media of the
camcorder is set differently from the default
format. Performing [MEDIA FORMAT]
(p. 79) may enable you to use your camcorder.
This will delete all data in the internal
recording media.
Data error.
An error occurred during reading or writing
the internal recording media of the camcorder.
If the message is preceded by a GPS indicator,
there may be some trouble with the GPS
receiver. Turn on your camcorder again.
(HDR-CX350VE/XR350VE)
This may occur when you keep applying shock
on the camcorder.
Movies recorded on other devices may not be
played back.
The Image Database File is damaged. Do
you want to create a new file?
HD movie management information is
damaged. Create new information?
The management file is damaged. When
you touch [YES], a new management file
is created. The old recorded images on the
media cannot be played back (Image files are
not damaged). If you execute [REPAIR IMG.
DB F.] after creating new information, playing
back the old recorded images may become
possible. If it does not work, copy the image
using the supplied software.






There is no HD movie management
information. Create new information?
You cannot record or play back movies
because no high definition image quality (HD)
movie management information exists. If you
touch [YES], new management information
is created and you can record or play back
movies with high definition image quality
(HD).
You can record standard definition image
quality (STD) movies or photos.
Inconsistencies found in Image Database
File. Do you want to repair the Image
Database File?
The Image Database File is damaged. Do
you want to repair the Image Database
File?
Inconsistencies found in Image Database
File. Cannot record or play HD movies. Do
you want to repair the Image Database
File?
The management file is damaged, and you
cannot record movies or photos. Touch [YES]
to repair.
You can record photos on a memory card.
Buffer overflow
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [DROP SENSOR] to [OFF],
and you may be able to record the image again
(p. 84).
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data.
Writing data onto the media of the camcorder
has failed. Attempts were made to recover the
data, but they were unsuccessful.






