Sirius Satellite Radio SV3TK1C - Manual (Page 43)

[
Troubleshooting
] 1
Troubleshooting
Symptom Solution
Receiver does not
power on Blown fuse, or the power cable is not properly connected.
Check for a bad fuse and check power cable connection
Receiver displays: No
Antenna The satellite antenna is not connected to the receiver.
Check the satellite antenna connection to the receiver.
Receiver displays:
Acquiring Signal No satellite signal is being received.
Check for obstacles over or around the satellite antenna.
Change the vehicle location to eliminate nearby obstacles
(bridges, overpasses, tress, buildings, etc.).
Audio static or loss of
clarity The FM frequency contains static.
Locate a quiet FM frequency on your vehicle radio and set the FM
transmitter frequency of the receiver to match.
If using the AUDIO OUT connector, check the cable connections.
No sound The audio cables are not connected, or the FM radio is set to the
wrong frequency. Check the audio cables at the receiver and the
radio. Tune the FM radio to the same FM frequency the receiver
is tuned.