Star Micronics NX-2460C - Manual (Page 77)

Checking the port settings in the User Setup Utility 71
Set initial condition IBM ESC [K
Ignored STD ESC h n
Stop printing IBM ESC j
Select printing color Both ESC r n
Cancel double-high mode STD ESC w0
Select double-high mode STD ESC w1
Ignored STD ESC ~ n
NEC Commands
Description Mode ASCII Code
Set line spacing to n/360
″
STD FS 3 n
Initialize printer STD FS @
Cancel expanded printing STD FS E0
Select expanded printing STD FS E1
Select expanded (triple-width) printing STD FS E2
Select forward feed STD FS F
Select standard character table STD FS I0
Select IBM character table STD FS I1
Move download characters in 00H-7FH area to 80H-FFH STD FS I2
Select reverse feed STD FS R
Cancel double-height mode STD FS V0
Select double-height mode STD FS V1
24-pin hex density bit image STD FS Z
Print characters from all character chart STD FS \
Print one character from all character chart STD FS ^
Other Commands (Continued)
Description Mode ASCII Code