Sangean DDR-31+ User Manual

Page 25

17. The alarm day digits on the display will flash. Press the Tuning Up

or Down buttons until the desired the alarm day is set. There are

four “Alarm day“ options as Once, Weekends, Weekdays,

and Daily.

18. Press and release the Select button to confirm your selection.

The alarm day setting is stored in the radio.

19. The lower line of the display will show a bar-graph indicating sound

level of the alarm. Press the Tuning Up or Down buttons until the

desired volume is set.

Note:

The default minimum volume level of the alarm is one.

20. Press and release the Select button to confirm your selection.

The alarm volume setting is stored in the radio.

21. The alarm setup digits on the display will flash. Press the Tuning Up

or Down buttons to switch the alarm setup digits as needed.

There are two “Alarm Setup“ options as On and Off.