Sanyo VPC-T1284 - Manual (Page 18)

EN-17
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
„ The camera is turned on for the first time.
„ The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [ ] or [ ]; or press
the button.
2. Press the button.
3. Select [Setup] with the a f button.
4. Select [Date/Time] with the O
Oc / ed
buttons, and press the button.
5. Select the date format with the O
Oc / ed
buttons, and press the button.
„ Select the item’s field with the se / af
buttons and adjust the value for the date and
time with the O
Oc / ed buttons.
„ The time is displayed in 24-hour format.
„ After confirming all settings are correct, press
the button.
6. To exit from the [Setup] menu, press the
button.