Sennheiser SK 500 G3 - Manual (Page 14)

13
Using the bodypack transmitter
To switch the bodypack transmitter off :
̈
If necessary, deactivate the lock mode (see page 13).
To switch the bodypack transmitter on and to deactivate
the RF signal on switch-on (offline operation):
To activate the RF signal :
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via
the “
Auto Lock ” menu item (see page 23).
If the lock mode is activated, you have to temporarily
deactivate it In order to be able to operate the bodypack
transmitter:
̈
Keep the ON / OFF button pressed until “ OFF ”
appears on the display panel. The red ON LED
¿
goes off and the display panel turns off.
When in the operating menu, pressing the ON /
OFF button will cancel your entry (ESC function) and
return you to the current standard display.
̈
Keep the ON / OFF button pressed until “ RF Mute
On? ” appears on the display panel.
̈
Press the SET button.
The transmission frequency is displayed but the
bodypack transmitter does not transmit an RF
signal. The transmission icon
ብ
is not displayed.
When the pilot tone function is activated on both
bodypack transmitter and receiver, “
RF Mute ”
appears on the receiver’s display panel.
Use this function to save battery power or to
prepare a bodypack transmitter for use during live
operation without causing interference to existing
transmission links.
̈
Briefly press the ON / OFF button.
“ RF Mute Off? ” appears on the display panel.
̈
Press the SET button.
The transmission icon
ብ
is displayed again.
̈
Press the SET button.
“ Locked ” appears on the display panel.
̈
Press the rocker button.
“
Unlock? ” appears on the display panel.
MHz 542.625
ew500 G3
MUTE P
AF
ብ