Samsung SSC14WEB - Manual (Page 25)

Eng-25
Chapter 3: Setting each item function at SETUP
MENU
Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the
f
SETUP MENU is available only in QUAD MODE.
ollowing menu OSD box. Setting method of each SETUP MENU function and operation is as follows.
3-1) ADJUST MENU function and setting method
Function: Allows adjustment to the display status
Setting method: Move to #1. ADJUST MENU by
pressing , KEY and press the
KEY to display the OSD as shown in the figure below. (The figure shows the initial
setting status.)
Move to a target item by pressing , KEY left or right.
Enter the item by pressing the KEY.
At this time, set a target value by pressing , KEY left or right
You can move to another item by pressing again the KEY after setting the target value.
(1) CONTRAST : Adjusts light and shade of screen
(2) BRIGHT : Adjusts lightness of entire screen
(3) COLOR : Adjusts color density
(4) TINT : Adjusts color sense
(5) SHARPNESS : Adjusts contour of screen
06/01/03 13:14:00
1. ADJUST
2. DATE/TIME
3. DWELL TIME
4. DISPLAY
5. TITLE
6. ALARM
7. NETWORK SETUP
8. VIEW EVENT LOG
06/01/03 13:14:00
CONTRAST 50
BRIGHT 50
COLOR 50
SHARPNESS 50
TINT 50
SETUP MENU
ADJ UST SETTING