General setting – Sanyo DSR-3016 User Manual
Page 75
GENERAL SETTING
☞
User password setting
Example: To set the password to “ AB123456”
1
Use the jog dial to move the cursor to USER, and then turn
the shuttle dial clockwise.
The first password entry bar flashes.
2
Use the jog dial to display “ A” , and then turn the shuttle dial.
The second password entry bar flashes.
•
The characters that can be used in the password are: 0, 1, ... 9,
A, B, C, ... Z
3
Use the jog dial to display “ B” , and then turn the shuttle dial.
The third password entry bar flashes.
4
Repeat this procedure to continue entering “ 123456” , and
then turn the shuttle dial clockwise.
The cursor moves to “OFF” and flashes.
5
Use the jog dial to change the setting to “ ON” , and then turn
the shuttle dial clockwise.
The cursor moves to REC CONTROL.
Carry out the recording and playback operating privilege
setting. (See page ??.)
☞
Recording and playback operating privilege
setting
Selection of operating privilege
The available operations vary depending on the ON/OFF and
ADMIN/USER settings.
Selection
conditions
Details of operation
All operations are locked. When the user
password is entered at the password entry
screen, only playback operations can be
carried out. When the Administrator password
is entered, all operations can be carried out.
All operations are locked. When the user
password is entered at the password entry
screen, only playback and recording
operations can be carried out. When the
Administrator password is entered, all
operations can be carried out.
Recording and menu operations are locked.
Playback operations are not locked. When the
Administrator password is entered, all
operations can be carried out.
Menu operation is locked. Recording and
playback operations are not locked. When the
Administrator password is entered at the
password entry screen, all operations can be
carried out.
1
Use the jog dial to move the cursor to REC CONTROL.
2
Turn the shuttle dial clockwise, and then use the jog dial to
select “ ADMIN” or “ USER” .
This completes the setting.
3
Press the EXIT/OSD button.
The display returns to the normal screen.
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 OFF
REC CONTROL : ADMIN
USER -------- OFF
USER A------- OFF
USER AB------ OFF
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER AB123456 ON
REC CONTROL : ADMIN
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : USER
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : ADMIN
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : USER
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
EXIT/OSD
74
English