Sony VPH-V20M - Manual (Page 14)

14
Projecting
To turn off the power
To turn off the projector
Press the 1/u button or the MAIN POWER switch on the projector.
If the projector is turned off with the MAIN POWER switch, the projector
is turned on again only by the MAIN POWER switch.
To turn off the main power
Press the MAIN POWER switch on the projector.
If you turn off the main power with the 1/u button and the MAIN POWER
switch, the projector is in standby mode when you press the MAIN
POWER switch. Press the 1/u button to turn on the projector.
To switch the aspect ratio
Press the aspect button.
When inputting 16:9 (squeezed) signal from equipment such as a DVD
player, set to 16:9.
4:3 When the picture with ratio 4:3 is input.
16:9 When the picture with ratio 16:9 (squeezed) is input.
To cut off the picture
Press the PIC MUTING button.
To restore the picture, press the PIC MUTING button again.
If the picture rolls vertically
Turn the V HOLD control on the projector until the picture stabilizes.
To adjust the horizontal position of the RGB input picture
Turn the H SHIFT control until the picture fits the screen.
Projecting