Samsung AK68-01808C - Manual (Page 14)

basic functions
14_ basic functions
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input
by pressing TV/VIDEO button on the TV remote con-
trol.
- If you connected an external Audio System, turn on
your Audio System and set it to the correct Audio
Input.
After plugging in the player, the first time you press
the DVD POWER button, this screen comes up: If
you want to select a language, press π/† button
and then press ENTER button. (This screen will
only appear when you plug in the player for the first
time.)If the language for the startup screen is not
set, the settings may change whenever you turn the
power on or off. Therefore, make sure that you select
the language you want to use. Once you select a
menu language, you can change it by pressing the
button on the front panel of the unit for more than
5 seconds with no disc in the unit. Then the SELECT
MENU LANGUAGE window appears again where
you can reset your preferred language.
Playback
1. Press the OPEN/CLOSE ( ) button.
2. Place a disc gently into the tray with the disc’s label
facing up.
3. Press the PLAY/PAUSE ( ) button or OPEN/
CLOSE ( ) button to close the disc tray. When
you stop disc play, the player remembers where you
stopped, so when you press PLAY/PAUSE ( )
button again, it will pick up where you left off.
4. Stopping Play
Press the STOP ( ) button during play.
6. Pausing Play
Press the PLAY/PAUSE ( ) on the remote control
during play.
- Screen stops, no sound.
To resume, press the PLAY/PAUSE ( ) button
once again.
5. Removing Disc
Press the OPEN/CLOSE ( ) button.
Note
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
- If the player is left in the stop mode for more than
about 30 minutes, the power will automatically shut
off except when the MIC is connected.(Automatic
Power-Off Function)
- If the player is left for about 5 minutes in pause
mode, it will stop.
- This ( ) icon indicates an invalid button press.
English
Français
Deutsch
Español
Italiano
Nederlands
7. Step Motion Play (Except CD)
Press the SKIP (
) button on the remote control
during PAUSE mode.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press the PLAY/PAUSE (
) button to resume
normal play.
- You can only perform step motion play in the
forward direction.
8. Slow Motion Play
Press the SEARCH (
/ ) button to choose the
play speed between 1/2, 1/4 and 1/8 of normal
during PAUSE mode.
- No sound is heard during slow mode.
- Press the PLAY/PAUSE (
) button to resume
normal play.