Sherwood R-325 - Manual (Page 3)

INSTALLATION
Please make the following connections (where applicable).
Notes!
– SWITCH OFF THE RECEIVER BEFORE MAKING ANY
CONNECTIONS.
– Do not connect the receiver to the AC outlet when making
connections.
– Be sure to connect the white plugs to the L (left) and the
red plugs to the R (right) jacks when making connections.
CONNECTIONS
1.FM INDOOR ANTENNA
Connect the supplied antenna to the FM antenna
terminals, as shown.
Change the position of the antenna until you get the best
reception of your favorite FM stations.
FM OUTDOOR ANTENNA
A 75Ω outdoor FM antenna may be used to further
improve the reception.
Disconnect the indoor antenna before replacing it with the
outdoor one.
2.AM LOOP ANTENNA
Tune in your favorite AM station and position the loop
antenna for best reception. Try other stations and find the
position that gives best overall reception. When this unit is
mounted in a rack or placed on a shelf with insufficient
space behind, hang the antenna on a wall in the direction
which gives best reception.
3.SYSTEM GROUND TERMINAL
When using a turntable, connect the ground lead from
your TURNTABLE to this terminal.
4.AUDIO IN/OUT
– PHONO IN – input jacks for connecting a turntable.
Connect these jacks to the output jacks of a turntable
with MM (Moving Magnet) type cartridge.
– CD IN – input jacks for connecting a Compact Disc
player.
Connect these jacks to the OUTPUT jacks of the CD
player.
CONNECTIONS
– AUX/TV IN – input jacks for connecting the fixed audio
output jacks of a TV set or any other source you want to
hear; an additional CD player or a cassette deck.
– TAPE MON PLAY/REC – play and rec jacks for
connecting a cassette deck, a Digital Compact Cassette
deck or another digital recording device.
?W2@@6X?he ?7@@@@1?he ?@@@@@@?he ?@@@@@@?he ?3@@@@5?he ?V4@@0Y?he
Connect the PLAY jacks to the PLAY or LINE OUTPUT
jacks of the deck.
These jacks may also be connected to the LINE
OUTPUT jacks of an audio processor such as an
optional graphic equalizer or a Digital Signal Processor.
?W2@@6X?he ?7@@@@1?he ?@@@@@@?he ?@@@@@@?he ?3@@@@5?he ?V4@@0Y?he
Connect the REC jacks to the REC or LINE I NPUT
jacks of the deck.
These jacks may also be connected to the LINE INPUT
jacks of an audio processor such as an optional graphic
equalizer or a Digital Signal Processor.
– VCR 1 PLAY/REC – play(input) and rec(output) jacks for
connecting the audio OUTPUT and INPUT jacks of a Hi-Fi
stereo VCR.
Connect the PLAY jacks to the AUDIO PLAY or
OUTPUT jacks of the VCR.
Connect the REC jacks to the AUDIO REC or INPUT
jacks of the VCR.
Note : The audio and video inputs and outputs of the VCR
must be connected to allow the
VCR 2/CAMCORDER inputs on the front of the
receiver to be used for recording input.
3
ENGLISH
Important note for connecting equipment that does
not have IN/OUT markings on the input and output
jacks:
R-325 Device to be connected e.g. cassette deck.
PLAY PLAY or OUT
REC REC or IN
R L R DIGI-LINK DIGI-LINK
L
A A
B B
MODEL NO. R-325
AUDIO/VIDEO RECEIVER
SER. NO
GND
PHONO
CD
AUX/TV
ANTENNA
TAPE
MON.
PLAY
REC
REAR SPEAKERS(4Ω) REAR SPEAKERS(4Ω)
FRONT SPEAKERS(8~16Ω) FRONT SPEAKERS(8~16Ω)
CENTER SPEAKER(8Ω) CENTER SPEAKER(8Ω)
R R L L
R R
R R
L L
L L
SUB
WOOFER PRE-OUT
SUB WOOFER
PRE-OUT
FRONT PRE-OUT
FRONT
PRE-OUT FRONT
MAIN-IN
FRONT MAIN-IN CENTER
PRE-OUT
CENTER
PRE-OUT
REAR
PRE-OUT
REAR
PRE-OUT
MODEL NO. R-325
AUDIO/VIDEO RECEIVER
SER. NO
AC INPUT
~120V /60Hz 2.3A
AC INPUT ~120V /60Hz
2.3A
GND
PHONO
CD
AUX/TV
MULTI
ROOM
MULTI
ROOM
ANTENNA
AM
LOOP
AM
LOOP
FM
75Ω
FM
75Ω TAPE MON.
MON.
OUT
MON.
OUT
PLAY
PLAY PLAY
VCR1 VCR1
REC
REC REC
+
-
+
-
+
-
+
-
+ + + + - - - -
+
-
+
-
FM
FM
AM
(INDOOR ANTENNA)
(OUTDOOR ANTENNA)
1 2 3 4 7 8 12 9 10 13
14 11 6 5
VIDEO VIDEO
AC OUTLET
SWITCHED
-120V/60Hz
1A MAX 100W
AC OUTLET
SWITCHED
-120V/60Hz
1A MAX 100W
SUPPLIED ADAPTOR
300 ohm
feeder