Sony STR-DH810 User Manual
Page 76

76
GB
a)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
b)
You can only select this parameter if “SP PATTERN” is not set to a setting with surround back or front high
speakers (page 78).
c)
Depending on the speaker pattern setting, some parameters may not be available.
d)
You cannot select this setting if your speaker is set to “LARGE”.
e)
This parameter is only available when HDMI input signals is detected.
f)
“FEET” for models of area code U2.
g)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
HDMI
[
Control for HDMI
[CTRL: HDMI]
CTRL ON, CTRL OFF
CTRL ON
HDMI Signal Pass Through
[PASS THRU]
ON, AUTO, OFF
OFF
Setting HDMI audio input
[AUDIO OUT]
AMP, TV+AMP
AMP
Subwoofer level for HDMI
e)
[SW LEVEL]
SW AUTO, SW +10 dB, SW 0 dB
SW AUTO
Subwoofer Low Pass Filter for
HDMI
e)
[SW L.P.F.]
L.P.F. ON, L.P.F. OFF
L.P.F. ON
Audio Return Channel
[ARC]
ARC ON, ARC OFF
ARC ON
SYSTEM
[
Brightness of the display
[DIMMER]
DIM MAX, DIM MID, DIM OFF
DIM OFF
Sleep Timer
[SLEEP]
2:00:00, 1:30:00, 1:00:00, 0:30:00,
OFF
OFF
Auto standby mode
[AUTO STBY]
STBY ON, STBY OFF
STBY ON
Naming inputs
[NAME IN]
For details, see “Naming inputs”
(page 44).
S-AIR
[
S-AIR ID
g)
[S-AIR ID]
ID: A, ID: B, ID: C
ID: A
Pairing
g)
[PAIRING]
START, CONDITION
START
S-AIR mode
g)
[S-AIR MODE]
PARTY, SEPARATE
PARTY
RF Change
g)
[RF CHANGE]
RF AUTO, RF ON, RF OFF
RF AUTO
S-AIR Standby
g)
[S-AIR STBY]
STBY ON, STBY OFF
STBY OFF