SBC comm Alcatel Speed Touch PC AlcatelPCNT02A - Manual (Page 13)

Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 12
©2001 SBC Advanced Solutions, Inc. All rights reserved
Step 5
: Installing the Alcatel Speed Touch PC
If you shutdown your computer, leave the CD in the the CDROM
drive, and SBC Express will continue after you restart.
You should be at the following screen in the SBC Express Software:
5-1 Click Shutdown in SBC Express and then turn off all peripheral devices.
Remember to leave the SBC Express CD in the CD-ROM drive.
5-2 Unplug the power cord for your computer from the electrical outlet.
5-3 Open the case of your computer (review your computer manufacturer’s Owner’s Manual
for specific instructions).
5-4 Touch the computer chassis (metal frame) before touching the Alcatel Speed Touch PC
adapter. This helps to protect the Alcatel DLS Modem from static electricity.
5-5 Locate an available PCI slot (usually white in color). You may use any available PCI
slot. Make sure you are looking downwards on the PCI slot. You may need to turn the
computer on its side to accomplish this (review your computer manufacturer’s Owner’s
Manual for specific instructions).