Sharp QSINUFO - Manual (Page 8)

Operating Instructions
1.3.2 Confirming the Network Camera Setting
To confirm if the Network Camera is configured correctly, please access to Top
Page. If the Top Page appears, your Network Configuration is completed.
1. Start up the web browser.
2. Enter "http://IP address : Port No." in the address field and press [Enter]. Top Page
appears.
1.3.3 Setting Network Parameters
IP Network: PC, Network Camera and other IP devices can establish the network.
Each device has an unique IP address of their own..
Note
MAC address
Ethernet defines a 48-bit addressing scheme. Ethernet hardware manufacturers
purchase blocks of Ethernet addresses and assign them in sequence to their Ethernet
interface hardware. No two hardware interfaces have the same Ethernet address.
Ethernet address is sometimes called hardware addresses, physical addresses, Media
Access Control (MAC) addresses, or layer 2 addresses. MAC address is used in this
manual.
ActiveX Controls
If you are using Internet Explorer the first time the PC connects to the Network
Camera, a pop up Security Warning window will appear. The window requests your
8