Samsung CLX-8380 - Manual (Page 92)

11.6
4 Pull the waste toner container out of the machine using its handle.
5 Turn the imaging unit locking levers outwards to release and open
the inner cover.
6 Pull the used imaging unit out of the machine using the handle on its
bottom.
7 Remove the new imaging unit from its bag.
Caution
Don’t use sharp objects, such as a knife or scissors, to
open the imaging unit package. You could damage the
surface of the imaging unit.
8 Remove the paper protecting the surface of the imaging unit.
9 Remove the cap, and carefully pull the seal tapes out of the imaging
unit.
10 Thoroughly shake the new imaging unit side to side five or six times.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Caution
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to
light for more than a few minutes. Cover it with a piece of
paper to protect it if necessary.