Sony BDP-S350 - Manual (Page 49)

49
Set
tin
g
s and
Ad
ju
st
m
ent
s
The screen saver image appears when you do
not use the player for more than 15 minutes
while an on-screen display, such as the home
menu, is displayed on your TV screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
Informs you of newer software version
information. Network connections and
settings are required when using this function
(page 49).
Displays the player’s software version
information and the MAC address.
Network Settings
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
1
Select “Internet Settings” in “Network
Settings,” and press ENTER.
2
Select “IP Address Acquisition,” and
press ENTER.
3
Select an item, and press ENTER.
• When you select “Use DHCP”
If you set “DNS Server Auto
Acquisition” to “Off,” set the following
item:
– DNS Server (Primary)/DNS Server
(Secondary)
• When you select “Use Static IP
Address”
Set the following items:
– IP Address
– Subnet Mask
– Default Gateway
– DNS Server (Primary)/DNS Server
(Secondary)
Auto Display
On Automatically displays
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off Displays information only
when you press DISPLAY.
Screen Saver
On Turns on the screen saver
function.
Off Turns off the function.
Software Update Notification
On Sets the player to inform you
of newer software version
information (page 39).
Off Turns off the function.
System Information
Internet Settings
Use DHCP Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static IP
Address Set the IP address
manually according to
your network
environment.
,continued