Sony 4-114-858-12(1) - Manual (Page 74)

74
x TRANS CURVE
You can select the transition curve.
Characteristics of the transition curves are
illustrated in the following graphs.
*1: parameter level
*2: time
LINEAR
Makes the transition linearly.
B SOFT STOP
Makes the transition slowly at the end.
SOFT TRANS
Makes the transition slowly at the
beginning and end, and linearly in
between.
b Notes
• You cannot change [TRANS TIME] and
[TRANS CURVE] settings during store, check,
or execution of [SHOT TRANSITION]. Cancel
[SHOT TRANSITION] setting by pressing the
ASSIGN 4 button several times before changing
[TRANS TIME] or [TRANS CURVE] setting.
x START TIMER
You can set the timer for starting the shot
transition. You can select the time from
[5sec], [10sec] and [20sec]. The default
setting is [OFF].
x REC LINK
B OFF
Not use this function
SHOT-A
Starts transition to SHOT-A when
recording is started.
SHOT-B
Starts transition to SHOT-B when
recording is started.
When you set this function to [ON], you
can record with the wider color range. Your
camcorder can reproduce brilliant and vivid
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be
matched by conventional technologies.
The default setting is [OFF].
b Notes
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
• You cannot set [x.v.Color] in the following
cases:
– When recording in SD (standard) format
– When recording movies
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
x ON/OFF
When you select [ON], you can display
color bars on the screen or record them on a
tape. This function helps you to adjust
colors when you view movies recorded
with your camcorder on a TV or a monitor.
The default setting is [OFF].
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
* 1
* 2
* 1
* 2
* 1
* 2
x.v.Color
COLOR BAR
Press the MENU button t select the (CAMERA SET) with the SEL/PUSH EXEC dial.