Sierra Wireless RAVEN IDEN 20070914 - Manual (Page 10)

Rev 3.0B Feb.08 10
Figure 0-11: Raven Connectors
Figure 0-12:
Cellular
Antennas selected should not exceed a maximum gain of 5 dBi
under standard installation configuration. In more complex
installations (such as those requiring long lengths of cable and/
or multiple connections), it’s imperative that the installer
follow maximum dBi gain guidelines in accordance with the
radio communications regulations of the Federal Communica‐
tions Commission (FCC), Industry Canada, or your country’s
regulatory body (if used outside the US).
• RSS‐102 (...Health Canada’s Safety Code 6 for Exposure of
Humans to RF Fields)
• RSS‐129 (800 MHz Dual‐Mode CDMA Cellular
Telephones) (Analogue & CDMA)
• RSS‐133 r1 (2 GHz Personal Communications)
• http://www.industrycanada.ca.
Your Raven will work with most Dual‐Band PCS cellular
antennas with a TNC connector that works in the high and low
frequencies of the cellular technology of your modem. Connect
the primary antenna or primary RF cable directly to the
antenna connector on the back of the Raven.
Tip: When using a cable to an antenna placed away from the
modem, minimize the length of your cable. All gain from a more
advantageous antenna placement can be lost with a long cable to the
modem.
Serial
Power
Cellular