Sony DMX-R100 - Manual (Page 33)

33
Automation Operation
Automating Snapshot & Library Entry Recall
Automating the Recall of a Snapshot
1
Touch {CUE} at the bottom of the LCD, just left of
centre for the CUE GUI.
2
In the column headed TC LINK, make sure {ON} is
displayed for the Cue point to which a Snapshot is
to be linked and automated to timecode. If {OFF}
is displayed, touch it to change it to {ON}.
3
In the column headed EVENT, touch the entry
immediately to the right of the {ON} for a pop-up
and select {SNAPSHOT} if not already displayed.
4
In the column headed NUMBER, touch the entry
immediately to the right of the {SNAPSHOT} for a
pop-up displaying the list of Snapshots.
5
Select the Snapshot required by touching it.
6
Make sure {TC LINK} is selected beneath the
SNAPSHOT heading on the panel.
Every time the material is played past the Cue point,
the Snapshot selected will be restored.
Automating the Recall of a Library Entry
EQ and Dynamics settings stored using the Library
function, accessible via the EQUALIZER/FILTER and
DYNAMICS GUIs, can be restored with reference to
timecode as follows:
1
In the column headed TC LINK, make sure {ON} is
displayed for the Cue point to which an EQ or