Sony DMX-R100 - Manual (Page 10)

10
Automation Operation
Automation Operation
TC AUTOMATION buttons
GUI is touched (changing its colour from yellow to
red). Touching it once more will drop it out.
• INDIVIDUAL CHANNELS
Any controls set to ready on an individual channel
will drop into automation record when the {WRITE}
button for that channel is pressed, and drop out when
it is pressed once more.
• ALL CHANNELS
Any controls set to ready on all channels will drop
into automation record when {MASTER DROP IN}, at
the bottom right of the LCD, is touched. Touching it
once more will drop all channels out.
Refer to the illustration ‘TC AUTOMATION buttons’
above for the following sections describing the
functionality of buttons related to automation.
1 1 1 1 1 OFF button
{OFF} is set as the system fire-up default. When this
button is lit, the recording and replaying of automation
data is prevented. All functions remain as manual
operations.
TC AUTOMATION SNAPSHOT
A B SAFE
ABS
HOURS MINUTES SECONDS FRAMES SNAPSHOT
TRIM OFF
TO LINK DELETE SETUP
STORE RECALL UNDO
SET LOCATE BARS SET LTC
7 8 9
SHUTTLE – +
4 5 6
1 2 3
CLEAR 0 ENTER
3
2
4 1 6 5