Samsung DVD-V8500 - Manual (Page 10)

19
Tuner Band Setting
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “Channel”
Using the up/down and left/right buttons, move the selection cursor
to “Channel Setup”, then press ENTER to select.
3 Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
18
It is important to set the clock for accurate Timer Recording.
1 Open “SETUP MENU”
With the DVDin stop mode, press the SETUP button.
2 Select “Clock”
Using the up/down and left/right buttons, move the selection cursor
to “Clock Set/Adjust,” then press ENTERto select.
3 Set the Clock
Press LEFT/RIGHTto select each of the following options, then
press UP/DOWNto set each option:
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day
– Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
4 Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
Manual Clock Set
1 , 3
MAIN MENU
Clock Set/Adjust
RETURN ENTER
CLOCK SET/ADJUST
TIME DATE YEAR
1 2 : 0 0 A M 1/01 2002 TUE
RETURN
MAIN MENU
Channel Setup
RETURN ENTER
CHANNEL SETUP
Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
RETURN
CHANNEL SETUP
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN
00081A DVD-V8500/XTC-Eng2 11/21/02 1:55 PM Page 18