Backboard mounting (continued), Height adjustment and warning label placement, Warning – Spalding M316001 User Manual
Page 15
01/07
ID# M316001
15
Owner must ensure that all players know and follow these rules
for safe operation of the system.
WARNING
• DO NOT HANG on the rim or any part of the system including
backboard, support braces or net.
• During play, especially when performing dunk type activities,
keep player's face away from the backboard, rim and net.
Serious injury could occur if teeth/face come in contact with
backboard, rim or net.
• Do not slide, climb, shake or play on base and/or pole.
• When adjusting height or moving system, keep hands and
fingers away from moving parts.
• Do not allow children to move or adjust system.
• During play, do not wear jewelry (rings, watches, necklaces,
etc.). Objects may entangle in net.
• Keep organic material away from pole base. Grass, litter, etc.
could cause corrosion and/or deterioration.
• Check pole system for signs of corrosion (rust, pitting,
chipping) and repaint with exterior enamel paint. If rust has
penetrated through the steel anywhere, replace pole
immediately.
• Check system before each use for proper ballast, loose
hardware, excessive wear and signs corrosion and repair
before use.
• Check system before each use for instability.
• Never play on damaged equipment.
• Keep pole top covered with cap at all times.
• See instruction manual for proper installation and
maintenance.
R
ead and understand warnings listed
below before using this product.
F
ailure to follow these warnings may
result in serious injury and/or
property damage.
ID#: 588000 05/05
In the U.S.: 1-888-713-5488
In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339
In the U.S.: 1-800-334-9111
In the U.S.: 1-800-558-5234
In Canada: 1-800-284-8339
Adhere WARNING label (20) in
a clearly visible place.
NOTE:
7
10 ft.
(3.05 m)
REGULATION RIM HEIGHT
IS 10 FEET (3.05 m).
ATTACH A STEEL-FRAMED STYLE BACKBOARD (STYLE WILL VARY)
BACKBOARD MOUNTING (continued)
25
15
15
6
15
6
15
25
8
8
3.
Attach backboard using hardware
shown.
Folow instructions that are packaged
with backboard for specific assembly
details.
Crank
Hook
TO ADJUST BACKBOARD:
Position looped end of
crank onto hook as shown.
Rotate crank handle to
raise or lower backboard
HEIGHT ADJUSTMENT AND WARNING LABEL PLACEMENT
OR
22