Samsung 226UX - Manual (Page 5)

7) Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
>> Click here to see an animation clip
Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Not available in MagicBright mode of Dynamic Contrast.
Adjust buttons [ ] Adjust items in the menu.
Enter button [ ] /
SOURCE button Activates a highlighted menu item. /
Push the 'SOURCE/ ', then selects the video signal while the OSD is
off. (When the 'SOURCE/ ' button is pressed to change the input
mode, a message appears in the upper left of the screen displaying
the current mode -- Analog, Digital or USB input signal.)
If the monitor is used as a USB monitor (when connected via USB
cable), select USB mode by clicking the Enter icon.
AUTO button Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [ ] Use this button for turning the monitor on and off.
Power indicator
This light glows blue during normal operation, and blinking blue once
as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER port Connect the power cord for your monitor to the power port on the back of
the monitor.
DVI IN (HDCP) port Connect the DVI Cable to the DVI IN (HDCP) port on the back of your
monitor.
RGB IN port Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
USB connection terminal UP (USB upstream port): Connect the UP port of the monitor and
the USB port of the computer with the USB cable.
DOWN (USB downstream port): Connect the
DOWN port of the
USB monitor and a USB device with the USB cable.
To use DOWN (Downstream Port), you have to connect the
UP (Upstream Cable ) to the PC.
Make sure to use the USB cable supplied with this monitor to connect
the monitor's
UP port and your computer's USB port.
Kensington Lock The Kensington lock is a device used to physically fix the system when