Samsung SMT-190Dx - Manual (Page 46)

Eng-6
USER'S MANUAL USER'S MANUAL
Chapter 10 : Monitor
Setup Menu
No Signal Display
When there is no connection at the VGA input, the On
Screen Display will show this message.
Check signal cable.
VGA
OSD Menu Selection
Press DVR/LCD button to select LCD MENU or DVR
MENU by turns. If DVR/LCD LED is green,it means LCD
mode. if it is red, it is DVR mode.
A. Input Menu
Input
Source List : DVR 
PIP 
Edit Name 
Move Enter Exit
Inputs can be set to VGA mode.
1. Press the MENU and ENTER button.
. Press the ENTER or  button and then /
button to select input menu.
. Press the ENTER or button to save the setting
and exit.
 PIP ON (VGA mode only)
PIP
Move Enter Return
PIP : Off 
Size : 
Position : 
If you didn't select VGA input, this menu is not available.
1. Press the MENU and ENTER button.
. Press the / and ENTER button to select the
PIP menu.
. Press the ENTER or  button to see the sub menu.
. Press the / and ENTER button to select On.
5. Press the MENU or  button repeatedly to exit.
USER'S MANUAL