Sanus Systems PFV59S User Manual
Page 4
Right front panel
Left front panel
Screw 3 connector rods into holes in left and right front panels as indicated above.
Press fit 2 large wooden dowels into large holes in left and right panels as shown.
B
Glide (gray/black)
x 6
Large wooden dowels x 4
Base (underside)
x 6
Fasten 6 glides to the base as shown.
Note that there are 3 gray and 3 black glides. Use gray glides at front of the base if the stand is going to
be placed on a light colored floor. Use Black glides at the front if the stand is going to be placed on a
dark colored floor.
Front edge
Back edge