Siemens IGWIPS200-1 - Manual (Page 35)

IGWiPS200-1
Combination Input/Output Module
Channels ...............................................................1 analog input
1 analog output
2 digital inputs
2 digital outputs
Channel Isolation..................................................All (except for the analog input channel)
Reverse Polarity Protection ..................................Yes
Analog Channel
Range.............................................................4-20
mA
Input Impedance ............................................<170 Ohms
Repeatability..................................................0.2% of full scale
Resolution......................................................16-bit
Compatibility.................................................2-wire,
3-wire, 4-wire devices
Over-Voltage Rating .....................................42 Vdc maximum
Digital Input Channel
Input
Impedance ............................................20k Ohms
Over-Voltage Rating ....................................100 Vac/Vdc maximum
Voltage ..........................................................5 to 36 Vac/Vdc
Digital Output Channel
Contact
Rating...............................................250 Vac / 30 Vdc, 2A
Type...............................................................Dry contact, normally open
Power Input ..........................................................12 to 30 Vdc
Current Consumption ...........................................120 mA maximum
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F)
Faceplate Label Colors .........................................Analog In section – Green
Analog Out section – Yellow
Digital In section – Blue
Digital Out section - Pink
Pulse Input Module
Channels ...............................................................2
Input Voltage ........................................................3.6 Vdc minimum (Single Edge Mode), 100 mVac P-P
(Differential Mode)
Input Frequency....................................................0-32 kHz
Pulse Width ..........................................................10 μSec minimum
Input Impedance ...................................................1k Ohms (low), 90k Ohms (high), Selectable
Coupling ...............................................................AC or DC, Selectable
Channel Isolation..................................................Optical
Reverse Polarity....................................................Yes, protected
Power Input ..........................................................12-30 Vdc
Backup Power Supply ..........................................12-30 Vdc
Current Consumption ...........................................50 mA maximum
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F)
Faceplate Label Color...........................................Orange
Pulse Output Module
Channels ...............................................................2
Output...................................................................30 Vdc @ 250 mA maximum
External Voltage...................................................30 Vdc maximum
Frequency .............................................................0-32 kHz
Duty Cycle............................................................50%
Internal Pull-Up ....................................................1k Ohms
Channel Isolation..................................................No
Power Input ..........................................................12-30 Vdc
Power Consumption .............................................120 mA maximum
Operating Temperature Range..............................-40°C to 70°C (-40°F to 158°F)
Faceplate Label Color...........................................Orange
May 2007 33