SoundCraft Five Monitor Series - Manual (Page 47)

FIVE Monitor Functional Description 4.21
LOGIC IIN // LLOGIC OOUT
Rear Panel EDAC connectors are provided to link the logic systems of one FIVE
Monitor with a second console in a Master/Slave configuration. See Chapter 2,
Installation, for connection details.
Rearcon PPanel
The connections on the Master rear connector panel are as follows:
All AAudio XXLRs
Pin 1 Gnd (Screen)
Pin 2 Hot (In-phase signal)
Pin 3 Cold(Out-of-phase signal)
3-ppole ‘‘A’ ggauge JJack - IInputs/Outpus ((inc. IInserts)
Tip Hot (In-phase signal
Ring Cold(Out-of-phase signal)
Sleeve Gnd (Screen)
3-ppole ‘‘A’ ggauge JJack ((Headphones)
Tip Left Signal
Ring Right Signal
Sleeve Gnd (Screen)
4-ppin XXLR ((Lamp CConnection)
Pin 1 & 3 +/-12V max. current 400mA
Pin 4 0v